SansAmp Para Driver DI
Type: preamp, DI
Features: 4.7Meg Ohms input, bass/treble controls, semi-parametric EQ for feedback elemination (mid shift, mid); blend control, effects loop, 9V battery powered, phantom powered or AC adapter, 1/4-inch and XLR outputs with selectable levels, Parallel, uneffected output to run a dry signal to a separate channel
(replaced the SansAmp Acoustic DI)www.tech21nyc.com
Natural Blonde
Type: combo amp
Power rating: 200 watts
Drivers: 2 x 8″ enclosure w/ hi-fi tweeter & rear-firing 5” driver
Features: Classic SWR preamp w/ Aural Enhancer™
Bass Intensifier™ circuitry
Master tuning mute & individual channel mutes
Two independent input channels w/ 3-band active EQ & phase reverse
¼” Low Z Balanced input (ch. 1)
Low Z Balanced XLR & unbalanced ¼” input (ch. 2)
EQ bypass function on both channels
Independent XLR outputs for individual & summed channels
Independent side-chain effects loop for each channel
Footswitchable (Master mute & Bass Intensifier)
Convenient luggage-style telescoping handle w/ wheels (optional)
Spring-handle on bottom of cabinet for carrying or operation in tilt-back mode
California Blonde II
Type: combo amp
Power rating: 150 Watts RMS @ 8 Ohms
Drivers: 12″ speaker, tweeter (with tweeter attenuator control)
Range: 30 Hz to 16 KHz
Features: 2 Independent channels w/ 3-band active EQ & phase reverse, mic input w/ 16V Phantom Power supply onboard
Size: 24″H x 14.5″W x 14.5″D
Weight: 50 lbs.
Workingman’s 10
Type: combo
Power rating: 80 Watts RMS @ 8 Ohms internal speaker
100 Watts RMS @ 4 Ohms (with 8 ohm extension speaker)
Drivers: 10″ speaker + Piezo tweeter
Features: 3-Way Output Switch (selects Full Range, Horn Off, or Headphones Only)
Bass, Midrange, Treble Control, Aural Enhancer Control
Size: 16.25″W x 14.5″H x 14″D
Weight: 32 lbs.
Workingman’s 12
Type: combo
Power rating: 120 Watts RMS @ 8 Ohms internal speaker
160 Watts @ 4 Ohms (with 8 ohm extension speaker)
Drivers: 12″ speaker + Piezo tweeter
Features: 3-Way Output Switch
Bass, Midrange, Treble Control; Aural Enhancer Control
Automatic compressor/limiter
Size: 15.5″W x 22.25″H x 15.25″D
Weight: 50 lbs.
Baby Blue 2×8
Type: combo amp with tube preamp
Power rating: 160 Watts @ 4 ohms (internal cabinet)
180 Watts RMS @ 2.6 ohms (with 8 ohm extension cabinet)
200 Watts @ 2 ohms (with 4 ohm extension cabinet)
Drivers: 2 x 8″ speakers + 5″ Cone Tweeter
Features: Passive/Active Input: 800K Ohms
Active Input: 60K Ohms
3 band semi-parametric EQ, EQ bypass switch, Aural Enhancer Control
Size: 14.5″W x 24.5″ x 12.5″D
Weight: 45 lbs.
Baby Baby Blue 1×10
Type: combo amp
Power rating: 120 Watts @ 8 ohms RMS (internal cabinet)
160 Watts @ 4 ohms (with 8 ohm extension cabinet)
180 Watts @ 2.6 ohms (with 4 ohm extension cabinet)
Drivers: 10″ Speaker + Piezo tweeter
Features: Passive/Active Input: 800K Ohms
Active Input: 60K Ohms
3 band semi-parametric EQ, EQ bypass switch, Aural Enhancer Control
Size: 13 7/8″W x 19″H x 13 7/8″D
Weight: 39 lbs.
Spellbinder Blue
Type: combo amp
Power rating: 160 Watts @ 4 ohms
Drivers: 10″ Speaker + tweeter
Features: Tube Preamp, +15V Phantom Power with On/Off Switch, Phase Switch, Aural Enhancer, Side-Chain Effects Loop with Blend Control and Effects Bypass Switch
Size: Height: 19.5”, (49.5 cm); width: 15 3/8”, (39 cm); depth: 14.5”, (36.8 cm)
Weight: 26.5 lbs./11.6 kg
LaFaro combo amp
Type: combo amp, 2 channels
Power rating: 280 W
Drivers: 8″ woofer, 1″ doom tweeter
2-channel Class-A preamp, the inputs are suitable for virtually any pickup or microphone; phantom power, 4-band EQ + filters, 3 DI outputs – one for each channel and one in the master-section, effect loop,
available at www.kontrabass-atelier.de
Bass Fidelity B10/B12/B15
Type: combo amp, 1 channel
Power Rating: 400 W
Drivers: 10″/12″/15″ + 1″ tweeter
PUB-280 Active Acoustic Instrument Loudspeaker
Type: active acoustic instrument loudspeaker
Power rating: 280W@8 Ohms
Drivers: 8″ woofer, 1″ compression tweeter (2 way bass reflex)
Range: 22Hz to 22 kHz
Size: 45 x 35 x 37 cm
Weight: 23 kg
PUB-380 Active Bass Extension
Type: active acoustic instrument loudspeaker
Power rating: 380W@8 Ohms
Drivers: 10″ woofer
Range: 35Hz to 120 Hz
Size: 39 x 38 x 26,5 cm
Weight: 19,6 kg
Unico
Type: combo amp, 4-channel
Power rating: 150W RMS
Drivers: 8″, Tweeter
Features: Spring Reverb, Phantom Power, effect loop, XLR DI out
Size: 39 x 34 x 27 cm
Weight: 14,5 kg
Side
Type: active speaker (extension speaker for the Unico)
Power rating: 180W RMS
Drivers: 8″ woofer, 1″ dome tweeter
Size: 39 x 34 x 27 cm
Weight: 13 kg
David
Type: combo amp, two channels
Power rating: 150W
Drivers: 6″, 1″ dome tweeter
Features: Spring Reverb
Range: 40Hz to 22 kHz
Size: 30 x 34 x 24,5 cm
Weight: 9 kg
Bass
Type: bass reflex woofer
Power rating: 200W RMS
Drivers: 10″
Range: 25 Hz – 200 Hz
Size: 32 x 36 x 38 cm
Weight: 15,5 kg
The powered loudspeakers offered by Schertler are developped for use with Schertler pickups and preamps (PRE-A II). This speaker cabinets have only a power amp unit with volume control and no preamp/EQ, so an external preamp is a must.
The Unico and David amps are specially designed for use with the Schertler StatB and DynB Pickups; no external Schertler-preamp is needed. The Side and Bass are powered extension speakers for use with David and Unico.
RB-Pro (Rockabilly Preamp)
Type: preamp
Features: 2 channels; package includes bridge pickup (SH951) and fingerboard pickup (SH2500); runs on 9V battery or wall adaptor; built-in tuner; phase;
bridge channel: EQ (Bass, Mid, Treble), Subsonic, fingerboard channel: Low cut, Treble control
BCP3 Electric Bass Cable Preamp
Type: preamp
Features: bass, mid and treble controls, gain control (in the battery compartment), shape switch for different sounds, on/off switch, integrated battery compartment
Sadowsky Bass Preamp
Type: preamp
Features: input 330K Ohms, treble/bass boost controls, footswitch active/passive/mute, XLR out, battery or AC adapter powered (low battery indicator LED)
D-Bass 210
Type: combo amp
Features: “FFP” with Active Speaker Control technology, “COSM®” preamp models (including Modern, Vintage, and Super Flat), Tube Logic function (produces the fat and natural compression of tube amps), 4-band EQ with dedicated Tweeter Control knob, Passive/active input and dedicated piezo input (!), neodymium-based speakers (2 x 10″ + tweeter), Output Power 400W (160W + 160W + 80W), BI-AMP Structure, balanced out, tuner out, headphone out, effects send/return, line out, casters
SSB-1 Sound Shaper
Type: preamp
Features: 9V battery powered, volume/bass/trebel controls
SSB-2 Sound Shaper
Type: preamp
Features: mixed signal technology (combining digital control from an embedded processor and high precision audio analog circuitry), 5-band graphic equalizer (optimized to cover the bass and cello ranges), phase shift
Each band (and volume control) has 256 discrete adjustment points that are set at the touch of a pushbutton. All settings are precisely repeatable upon each power up and all are saved in non-volatile FLASH memory on power down under control of the system processor. On power up, all settings are automatically retrieved. Additionally, the SSB-2 is capable of storing up to 8 sets of player settings. Using a keyed pushbutton sequence, you can store and recall each set from memory at anytime.”
Both preamps are designed to mount directly to the pickup output jack.
PMB-1 Professional Master Blender
(no longer available)
Type: preamp, dual channel/blender
Features: Instrument channel (10Meg Ohms) + auxiliary/microphone input (820K Ohms) with 9V phantom power, stereo input, phase switch; gain/bass/mid/treble controls, 2 x 9V battery or AC adapter powered
AP13 Acoustic Processor
Type: preamp, dual channel/blender
Features: piezo input, microphone input with phantom power, Low cut filter, 7-band graphic EQ, Pan control, phase invert switch
Acousti-Q Tube preamp/blender
Type: tube preamp, dual channel/blender
Features: piezo input (10Meg Ohms), microphone input (3,2K Ohms, 12V phantom power), notch filter, semi-parametric midrange EQ, phase reversal, brilliance + bass controls, effects loop, AC adapter powered