{"id":460,"date":"2009-12-03T16:00:24","date_gmt":"2009-12-03T14:00:24","guid":{"rendered":"http:\/\/www.doublebassguide.com\/?p=460"},"modified":"2009-12-03T16:02:03","modified_gmt":"2009-12-03T14:02:03","slug":"arco-new-bass-amps-from-danmark","status":"publish","type":"post","link":"https:\/\/doublebassguide.com\/?p=460","title":{"rendered":"Arco: new bass amps from Danmark"},"content":{"rendered":"

Mathias has sent me a review of the new Arco <\/em>\u201cHugo\u201d double bass amp, which is made by bassist Jesper Lundgaard. It\u2019s to long to fit the proper comment field<\/a>, so I descided to post it here. Here we go:<\/em><\/p>\n

The arco-amplification Hugo<\/em><\/strong><\/p>\n

Arco Amplification is a brand name owned by Jesper Lundgaard, who has been developing amplifiers since his early youth. Looking back on an amazing career as a touring musician, he decided to take it a bit easier, stay home more, and focus on building bass and guitar amplifiers. He used to work together with a company named CADaudio, but they split and now he\u2019s a one man company. It\u2019s likely his company name will change in the future, but for now, it\u2019s arco amplification.
\nThe “hugo” is an amp built according to suggestions of Hugo Rasmussen, another legendary danish bassist. This is the amp I had the pleasure to try for a couple of days.
\nThe long-bearded legend seems to be a sucker for simplicity- the amplifier sports a very stripped down set of controls. From left to right, they are: Master Volume, a mute switch, treble and bass controls, a phase reverse switch, and a tone switch (where you can change between bright, normal, and dark). The amp has two inputs named “lo-z” and “hi-z”, and on the back there are two speaker outputs (one neutrik-speakon and one \u00bc” jack), a DI out and a mains cable plug which can be changed to a permanently attached mains cable if the customer wishes. The 500W power amplifier drives an 8 ohm, 8 inch neodym-speaker and comes to its full power potential when you hook up another enclosure to reach 4 ohm.
\nThe speaker connectors seem a little peculiar at first. There are both a jack and a speakon, and the jack plug disconnects the internal speaker (in case you want to connect a 4 ohm enclosure), while the speakon doesn\u2019t. Jesper said this is to give the user an option without an extra switch, and that seems reasonable, even though it\u00b4s a slightly unusual design decision. And it forces the user into using a speakon-to-jack cable in certain situations, but that\u2019s no big deal.
\nRemarkably small is the first thing that comes to mind when you see the amp. Pictures on the web give no realistic impression, but if you\u00b4re at your desk, you most likely have a DIN A4 paper around- add just about 5cm with and length, and you have the dimensions\u00a0 of the front. That\u2019s pretty darn small, I have to say, and once you lift it for the first time, you notice the extremely light weight- it weighs 7,9 kilos, making it the lightest bass combo around. The power\/weight ratio is just stunning. To achieve this, the absence of a traditional power supply is a big factor. Instead, the arco amplifiers have switching power supplies.
\nWhile the power supply is rather modern, the wiring is rather traditional, and that\u2019s a good thing: Instead of being soldered directly into the PCB, the pots are wired to the circuit board just like in old times. This saves the board from being damaged when mechanical shock occurs. The integrated circuits are socketed where possible, so that if one component fails, you can easily service the hugo.
\nYesyes, but the sound? I tried it at home first, and while that does not say much, it sounded outstanding. Very neutral, very clear, very strong. Very promising of the gig I played with it. Here, it was almost magic. The playing situation was far from ideal, being in a corner like often, the amp served almost only as a bass monitor for the drummer. But in this function, it was great also. It gave me a strong confident feeling to just hear my instrument as it sounds without an amp, but with more power and volume. There were no amplified characteristics in the sound. I believe that the microphone-like pickup (Schertler dyn-b) I use plays a big part in this, but there are may amplifiers out there that sound horrible with this pickup. It\u2019s supposed to be connected to a PA or an active speaker. That means, it calls for a super-neutral flat response amplifier, and that\u2019s what the arco is.
\nOn a rehearsal the next day, the pleasure continued. Trio with piano and drums, in a wonderful room, and the bass sound was\u2026 just this. The bass sound. Without any artificial colorings.
\nIn all this, I barely used the tone controls. I almost only did for test purposes, and that\u2019s what I found: The bass control has enormous power and can fatten the sound to a degree you\u2019ll likely never use, yet it\u2019s fine enough to just add a little if your bass, the room, or your taste calls for more fatness.\u00a0 The treble control acted weird, as it was, at least in my setup, more a midrange honk control. Turning it up didn\u2019t add any transparency, just nasal mids, turning it down made the sound kind of undefined \u00fcber-hifi. I asked Jesper about this (being a disappointment that doesn\u2019t fit the great impression the amp made), and he said the effect was due to this amp being a prototype, and the treble frequency was due to change in any case. Plus, he offered to try different frequencies that fit my pickup best.
\nThe tone switch proved very effective, and I used it to adjust the sound according to the volume. Playing softer, I chose the bright position, and turing it up (to a level I never use, I have to say), the now a little harsh sound (due to the frequency of the treble control, which was turned a notch over neutral) could be tamed and naturalized by using either medium or dark.
\nThe phase switch is a very effective tool against boomy feedbacks in situations where you cannot move sufficiently. It\u2019s found on some amps already and I firmly believe this should be a feature for every amplifier that\u00b4s intended for double bass use. (The Schertler dyn-b has its own phase switch, but it\u2019s located quite uncomfortably at the jack, and I much prefer futzing at\u00a0 the amplifier in a gig situation).
\nAnd the mute switch is very valuable in set breaks, as it\u2019s the most direct way of silencing the system without any potential clicks (of the power switch) and changes in volume.
\nThe playing experience was such a pleasurable one that I have a hard time going back to my Acoustic Image amplifier. Those two just don\u2019t compare in neutrality and power, the arco is way cleaner and a lot louder and just works better for what I want. The AI sound is kind of midrangey, and for some pickups (obviously, as it\u2019s so popular, for many) it does work quite well, but I always had honk problems and nasalities with it that I had to eq out to be kind of happy. With the arco, it\u00b4s just “plug and play” and you have a great sound from second one.
\nThe price of \u20ac1600 is quite high, but I think it\u2019s justified by the fact that Jesper only builds to order, so there\u2019s never a big stock of parts. And he builds them all alone and by hand, so the price is okay.\u00a0 And the everyday ease of carrying an amplifier that\u2019s lighter than anything else on the market is just wonderful and worth the money already.<\/p>\n

click here for more informations <\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

Mathias has sent me a review of the new Arco \u201cHugo\u201d double bass amp, which is made by bassist Jesper Lundgaard. It\u2019s to long to fit the proper comment field, so I descided to post it here. Here we go: The arco-amplification Hugo Arco Amplification is a brand name owned by Jesper Lundgaard, who has […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[24],"tags":[25],"_links":{"self":[{"href":"https:\/\/doublebassguide.com\/index.php?rest_route=\/wp\/v2\/posts\/460"}],"collection":[{"href":"https:\/\/doublebassguide.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/doublebassguide.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/doublebassguide.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/doublebassguide.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=460"}],"version-history":[{"count":0,"href":"https:\/\/doublebassguide.com\/index.php?rest_route=\/wp\/v2\/posts\/460\/revisions"}],"wp:attachment":[{"href":"https:\/\/doublebassguide.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=460"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/doublebassguide.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=460"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/doublebassguide.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=460"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}